1. Slide on XeroSox®Attach the open end of the pump to the outside valve. Stretch on the XeroSox® so that it completely covers the cast or bandage, and an additional inch (25mm) or more of bare skin. The top cuff should be smooth against the skin. Be aware that sharp fiberglass on a cast or a sharp fingernail can rip the XeroSox®. Cover sharp objects with a bandage or a sock with the toe cut out. |
|
2. Pump out the AirWith the pump attached to the outside valve, repetitively squeeze the pump until it stays flat. Remove the pump and push on the safety cap. After creating the vacuum, observe the XeroSox® before going into the water. As long as the XeroSox® stays vacuumed (tightly wrinkled), it is sealed and completely watertight. |
|
3. Slide offWhen you are finished using the XeroSox®, lift up the cuff to let the air back in. The XeroSox® should now feel loose. Slide the XeroSox® off.
|
|
home | introduction | buy online | products | contact us |
|
